Testing and validating underground hydrogen storage components
UK registered organisations can apply for a share of up to £5 million for a collaborative programme to accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of underground hydrogen storage.
Read the official page on Find a grant ↗Start an application ↗ Get new grants like this
- Funder
- UK Research and Innovation (UKRI)
- Where
- 🇬🇧 United Kingdom
- Status
- Closes 13 Jan 2027 · 54 days left
- Opened
- 23 Oct 2026
- Funding
- £2.5m–£5m per award
- Who can apply
- Most organisations
- Topics
- Science & research Innovation & technology Energy
About this grant
Description
UK Research and Innovation (UKRI) will invest up to £5 million from the R&D Missions Accelerator Programme (RDMAP) in a collaborative research and development programme. The programme will accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of underground hydrogen storage.
This competition responds directly to the recently launched Ultra Long Duration Energy Storage ULDES Challenge. The ULDES challenge will accelerate the UK’s commercialisation, manufacture and deployment of innovative and affordable long duration energy storage technologies with a duration over 100 hours. The ULDES challenge as a whole has up to £28 million to invest up to 2030, split between electrochemical and hydrogen for storage activities.
This competition sits alongside a separate £1.5 million competition that will provide funding for development expenditure projects to accelerate UHS projects towards final investment decision.
The aim of this competition is to fund a consortium programme which will enable the UK to accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of hydrogen in ULDES within the UK electricity sector. This should enable components to be used in commercial settings within a 2030 timeline. The awarded consortium should work as one cohesive programme, containing the skills and expertise to deliver the competition aim.
Your proposal must be relevant to underground hydrogen storage (UHS) conditions. It should be technology agnostic across UHS technologies whilst remaining capable of meeting the requirements of the ULDES Challenge statement, to ensure developments remain relevant across a range of UK UHS futures.
The UKRI R&D Missions Accelerator Programme are running two competitions across UHS:
Testing and validating underground hydrogen storage components (this competition)
Underground hydrogen storage demonstrator: DEVEX support
It is your responsibility to ensure you submit your application to the correct competition for your project. You will not be able to transfer your application, and it will not be sent for assessment if it is out of scope.
We expect funded projects from both competitions to work together where appropriate. We will provide further information to successful applicants after funding decisions have been made.
In applying to this competition, you are entering into a competitive process. This competition has a funding limit, so we may not be able to fund all the proposed projects. It may be the case that your project scores highly, but we are still unable to fund it.
Our experience from similar competitions suggests that you could have 20% chance of success.
We consider a range of factors when determining whether to provide funding to applicants. This includes an assessment of prior conduct, such as any outstanding payments owed to Innovate UK or UKRI. Such factors may influence the funding decision, potentially resulting in a refusal of funding or an award subject to additional scrutiny.
We also reserve the right to adjust funding allocations for any of our competitions. This may be in response to changes in policy, portfolio funding considerations or broader government funding decisions.
This competition closes at 11am UK time on the deadline stated in this Innovate UK competition brief. We cannot guarantee other government or third party sites will always show the correct competition information.
Project size
Your project’s total eligible grant funding request must be between £2.5 million and £5 million. Within a consortium, a single enterprise cannot request more than £3 million in grant funding from this competition.
Accessibility and Inclusion
We welcome and encourage applications from people of all backgrounds and are committed to making our application process accessible to everyone. This includes making reasonable adjustments for people who …
Objectives
Your proposal
The aim of this competition is to fund a consortium programme which will enable the UK to accelerate the development and validation of critical technologies needed for the safe, reliable and cost-effective use of hydrogen in ULDES within the UK electricity sector. This should enable components to be used in commercial settings within a 2030 timeline. The awarded consortium should work as one cohesive programme, containing the skills and expertise to deliver the competition aim.
Solutions must be relevant to underground hydrogen storage (UHS) conditions, though should be technology agnostic across the various UHS technologies capable of meeting the requirements of the challenge statement.
Hydrogen based ULDES has the potential to contribute to a resilient, flexible and decarbonised UK energy system. However, further innovation and technical evidence are needed to address challenges associated with materials compatibility, compression, component performance, metering, monitoring, containment and system integrity. This innovation needs to be addressed using a coordinated approach, to avoid duplication across thematic areas and allow developments in each area to be readily available to accelerate the others, to support the 2030 ambitions of the UKRI ultra long duration energy storage challenge.
Your project must bring together a multidisciplinary consortium capable of delivering a single, cohesive programme across the following three technical themes:
materials
compressors
components for metering and monitoring
Your project must also include:
an overarching programme management work package
cross cutting validation and certification activity
representative testing of technologies and components
meaningful engagement with relevant standards, certification and regulatory organisations
considerations of supply chain capabilities, dependencies and scalability
meaningful engagement with end users, storage developers, or operators
dissemination of technical evidence and learning
a credible route to exploitation, deployment and further commercial development in or from the UK
Programme approach
Your proposal must present one integrated programme containing, as a minimum:
Work package 0: programme management and integration
Work package 1: materials
Work package 2: compressors
Work package 3: components for metering and monitoring
Work package 4: cross-cutting validation, certification and standards
Work package 5: dissemination, exploitation and knowledge transfer
Alternative work package structures will be accepted if they clearly address every requirement and retain a coherent cross programme approach.
Programme management costs should not normally exceed 10% of the grant requested. Applicants must justify these costs and can distinguish overarching programme management from additional proportionate technical management within individual work packages.
Specific themes
Theme 1: Materials
Your project must develop and evaluate materials for underground hydrogen storage and associated equipment under relevant operational conditions.
This may include, but is not limited to:
liners
steels
cements
tubing
elastomers
casings
safety valves
packers
seals and other containment components
lower cost materials or manufacturing approaches
Your project can:
test and improve material compatibility with hydrogen under representative underground hydrogen storage operating conditions
investigate fatigue, degradation, integrity and containment
consider exposure to relevant fluids, brines, impurities and hydrogen sulphide, where applicable
develop models and tools that support lifetime and maintenance decisions
improve performance, cost, durability, reliability, manufacturability and scalability
generate evidence to support applicable standards and certification
identify credible routes to manufacture, scale-up and commercial deployment
Theme 2: Compressors
Your project must develop or …
Dates
28 October 2026
Online briefing event: watch the recording.
Briefing slides are now available to download from Supporting Information.
2 November 2026
Surgery session with Innovate UK Business Connect 11am: register to attend
12 February 2027
Invite to interview
15 March 2027
Interview panel starts
18 March 2027
Interview panel ends
24 March 2027
Applicants notified
1 May 2027
Project start on
Eligibility
Who can apply
Your project
Your project must:
have total eligible grant funding request of between £200,000 and £750,000
last between 6 and 12 months
start by 1 April 2027
end by 31 March 2028
Any organisation receiving funding must carry out its project work in the UK, intend to exploit the results in the UK, and spend most of the funding within the UK.
Projects must always start on the first of the month, even if this is a non-working day. You must not start your project until your Grant Offer Letter has been approved by Innovate UK. Any delays within Project Setup may mean we need to delay your project start date.
You must only include eligible project costs in your application. See our overview of eligible project costs.
If your project’s total eligible grant funding request or duration falls outside of our eligibility criteria, you must provide justification by email to [email protected] at least 10 working days before the competition closes. We will then decide whether to approve your request.
If your project does not meet our criteria and you have not requested justification approval, your application will be made ineligible and it will not be sent for assessment.
Lead organisation
To lead a collaborative project or to work alone, your organisation must be a UK registered business of any size.
More information on the different types of organisation can be found in our Funding rules.
Academic institutions cannot lead or work alone.
Project team
To collaborate with the lead, your organisation must be one of the following UK registered:
business of any size
academic institution
charity
not for profit
public sector organisation
research and technology organisation (RTO)
Each partner organisation must be invited into the Innovation Funding Service (IFS) by the lead to collaborate on a project. Once partners have accepted the invitation, they will be asked to login or to create an account in the IFS. They are responsible for entering their own project costs and completing their Project Impact questions in the application.
To be an eligible collaboration:
the lead and at least one other organisation must request funding
you must explain why you’re collaborating and how the collaboration will work
Non-funded partners
Your project can include organisations who do not claim any funding for their work on the project. Their costs will be covered from their own resources. These can include UK, EU and other non-UK organisations. …
Applying for grants? Grants Pro e-mails you every morning with the new grants and opened forecasts that match your saved searches, and adds deadline reminders in your calendar, a private RSS feed and CSV export. Try it free for 7 days, then $9/month, cancel any time. See what Pro does →
Applying? Read how to write a winning grant proposal.
Contains public sector information licensed under the Open Government Licence v3.0 (Find a grant). Last checked 19 Nov 2026. Always read the official page before applying: it has the full conditions, documents and how to apply.